Dhcp Server Configuration Command List - Digitalchina Networks DCS-3950 series Manual

host <address> [<mask> |
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
client-name <name>
no client-name
3.Enable logging for address conflicts
Command
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Admin Mode
clear ip dhcp conflict <address | all>
4. Configure count of ping packets and out time
Command
Global Mode
ip dhcp ping packets <count>
no ip dhcp ping packets
ip dhcp ping timeout <milliseconds>
no ip dhcp ping timeout

18.2.2 DHCP Server Configuration Command List

18.2.2.1 bootfile
Command: bootfile <filename>
no bootfile
Function: Set the file name for DHCP client to import on boot up; the 'no bootfile
'command deletes this setting.
Parameters: <filename> is the name of the file to be imported, up to 255 characters are
allowed.
Command mode: DHCP Address Pool Mode
Usage Guide: Specify the name of the file to be imported for the client. This is usually
used for diskless workstations that need to download a configuration file from the server
on boot up. This command is together with the 'next sever'.
Example: The path and filename for the file to be imported is 'c:\temp\nos.img' .
Switch(dhcp-1-config)#bootfile c:\temp\nos.img
Related command: next-server
DCS-3950 series Ethernet switch manual
Specifies the IP address to be assigned to
the specified client when binding address
manually
Specifies the unique ID of the user when
binding address manually
Configures a client name when binding
address manually
Explanation
Enables logging for DHCP address to
detect address conflicts
Deletes a single address conflict record or
all conflict records
Explanation
Configure count of ping packets to be be
assigned in DHCP Address pool
Configure timeout time after set ping
packets to receive responses
304