Configuration Modes; User Mode - Digitalchina Networks DCS-3950 series Manual

CLI interface is familiar to most users. As aforementioned, both out-of-band
management and Telnet login are all performed through CLI interface to manage the
switch.
CLI Interface is supported by Shell program, which consists of a set of configuration
commands. Those commands are categorized according to their functions in switch
configuration and management. Each category represents a different configuration mode.
The Shell for the switch is described below:

Configuration Modes

Configuration Syntax
Shortcut keys
Help function
Input verification
Fuzzy match support
4.2.1.1 Configuration Modes

4.2.1.1.1 User Mode

On entering the CLI interface, entering user entry system first. If as common user, it is
defaulted to User Mode. The prompt shown is 'Switch>', the symbol '>' is the prompt for
User Mode. When exit command is exit under Admin Mode, it will also return to the User
Mode.
Fig 4-9 Shell Configuration Modes of DCS-3950 series
DCS-3950 series Ethernet switch manual
User Mode
Admin Mode
Global Mode
31