Arp Scanning Prevention Typical Example - Digitalchina Networks DCS-3950 series Manual

192.168.99.7
21.3.1.2 debug anti-arpscan [port|ip]
Command：debug anti-arpscan <port | ip>
no debug anti-arpscan <port | ip>
Function：Enable the debug switch of ARP scanning prevention;' no debug anti-arpscan
<port | ip>' command disables the switch.
Parameters：None.
Default: Disable the debug switch of ARP scanning prevention
Command mode：Admin Mode
User Guide：After enabling debug switch of ARP scanning prevention users can check
corresponding debug information or enable the port-based or IP-based debug switch
separately whenever a port is closed by ARP scanning prevention or recovered
automatically, and whenever IP t is closed or recovered .
Example：Enable the debug function for ARP scanning prevention of the switch.
Switch(Config)#debug anti-arpscan

21.4 ARP Scanning Prevention Typical Example

Fig 21-1 ARP scanning prevention typical configuration example
In the network topology above, port E0/0/1 of SWITCH B is connected to port E0/0/19
of SWITCH A, the port E0/0/2 of SWITCH A is connected to file server (IP address is
DCS-3950 series Ethernet switch manual
255.255.0.0
341