Show Cluster Candidates - Digitalchina Networks DCS-3950 series Manual

Time since last status change
Heartbeat interval
Heartbeat hold-time
For the member switch
Member switch for cluster <clustername>
Member number
Management IP address
Command switch mac address
Heartbeat interval
Heartbeat hold-time
For the candidate switch
Candidate switch：
Register timer

6.4.1.2 show cluster candidates

Command: show cluster candidates
Function: Display the statistic information of the candidates on the switch
Parameters: None.
Default: None.
Command mode: Admin Mode.
Usage Guide: Executing this command on the switch will display the information of the
candidate switches. If this command is not executed on the command switch, error will be
returned.
Example: Show the candidate switches for the cluster on the command switch.
Switch#show cluster candidates
SN MAC Address
---- ------------------ --------------- -------------------- ----------------
0 00-03-0f-00-28-e8
1 00-03-0f-01-33-21
2 00-03-0f-20-14-09
3 00-03-0f-00-58-67
Show information：
show cluster candidates
SN
MAC Address
IP Address
Name
Device Type
DCS-3950 series Ethernet switch manual
number of members that are down.
Time since last status change.
Interval for heartbeat.
Hold-time for heartbeat.
Description
Cluster name and role, <clustername> is
the name of the cluster
ID for the member cluster.
Public IP address for the command switch.
MAC address for the command switch.
Interval for heartbeat.
Hold-time for heartbeat.
Description
Interval for the register timer.
Ip Address Name
192.168.1.54 slave1
192.168.1.23 slave2
192.168.2.5 slave3
192.168.3.3 slave4
Description displayed as lists
Serial number.
MAC address for the candidate switch.
IP address for the candidate switch.
Host name for the candidate switch.
Device type for the candidate switch.
Device Type
DCS-2008E
DCS-2017E
DCS-2017E
DCS-2026E
116