Authentication Login - Digitalchina Networks DCS-3950 series Manual

no telnet-server enable
telnet-user <user-name> password
{0|7} <password>
no telnet-user <user-name>
telnet-server securityip <ip-addr>
no telnet-server securityip <ip-addr>
authentication login {local|radius|local
radius|radius local}
no authentication login
Admin Mode
Monitor
no monitor
2. Telnet to a remote host from the switch
Command
Admin Mode
telnet [<ip-addr>] [<port>]
5.2.2.3 Telnet Command List

5.2.2.3.1 authentication login

Command：authentication login {local | radius | local radius | radius local}
no authentication login
Function：Configure the Telnet Server to set the password authentication mode and
privilege of remote access users; the 'no authentication login' command is used to reset
it to the default authentication mode.
Default Setting：The default access authentication mode is local.
Command mode：Global Mode.
Usage Guide: When combined authentication is used, authentication method in the front
will be of the highest priorities. And the latter, the lower. If a user is approved by any
authentication method of higher priority, any authentication method of lower priority will be
ignored. To be noticed, when radius is used for authentication, AAA must be enabled, and
a dedicated radius server should be configured.
DCS-3950 series Ethernet switch manual
switch: the 'no telnet-server enable'
command disables the Telnet function.
Configure the username and password to
login to the switch through Telnet: the no
telnet-user <user-name> command
disables Telnet accredited user.
Configure the secure IP address to login
to the switch through Telnet: the 'no
telnet-server securityip
<ip-addr>' command deletes the
authorized Telnet secure address.
Configure validatory mode of
long-distance login in
Display debug information for Telnet
client login to the switch; the 'no
monitor' command disables the debug
information.
Explanation
Login to a remote host with the Telnet
client included in the switch.
47