Vlan Interface Configuration - Digitalchina Networks DCS-3950 series Manual

7.2.2 VLAN Interface Configuration

7.2.2.1 VLAN Interface Configuration Task List
1. Enter VLAN Mode
2. Configure the IP address for VLAN interface and enable VLAN interface.
1. Enter VLAN Mode
Command
Global Mode
interface vlan <vlan-id>
no interface vlan <vlan-id>
2. Configure the IP address for VLAN interface and enables VLAN interface.
Command
VLAN Mode
ip address <ip-address> <mask>
[secondary]
no ip address [<ip-address> <mask>]
VLAN Mode
Shutdown
no shutdown
7.2.2.2 Vlan Interface Command List
7.2.2.2.1 interface vlan
Command: interface vlan <vlan-id>
no interface vlan <vlan-id>
Function: Enter VLAN Interface Mode; the 'no interface vlan <vlan-id>' command
deletes existing VLAN interface.
Parameters: <vlan-id> is the VLAN ID for the establish VLAN, the valid range is 1 to
4094.
Command mode: Global Mode.
Usage Guide: None
Example: Enter into the VLAN Interface Mode for VLAN1.
Switch(Config)#interface vlan 1
Switch(Config-If-Vlan1)#
DCS-3950 series Ethernet switch manual
Explanation
Enters VLAN Interface Mode; the 'no
interface vlan <vlan-id>' command
deletes specified VLAN interface.
Explanation
Configures the VLAN interface IP
address; the 'no ip address
[<ip-address> <mask>]' command
deletes the VLAN interface IP address.
Enables/Disables VLAN interface
127