Configuring Snmp - Digitalchina Networks DCS-3950 series Manual

3.3.5 Configuring SNMP

Select '4' in the Setup main menu and press Enter to start configuring SNMP, the
following appears
Configure SNMP
[0]: Config SNMP-server read-write community string
[1]: Config SNMP-server read-only community string
[2]: Config traps-host and community string
[3]: Config SNMP-server status
[4]: Config SNMP traps status
[5]: Add SNMP NMS security IP address
[6]: Exit
Selection number:
Select '0' in SNMP configuration menu and press Enter, the following screen appears:
Please input the read-write access community string[private]:
Note: the valid length for a read-write access community string is 1 to 255 characters; the
default value is 'private'. When a valid read-write access community string is entered,
pressing Enter returns you to the SNMP configuration menu.
Select '1' in the SNMP configuration menu and press Enter, the following screen will
appear:
Please input the read-only access community string[public]:
Note: the valid length for a read-only access community string is 1 to 255 characters;
the default value is 'public'. When a valid read-only access community string is entered,
press Enter returns to the SNMP configuration menu.
Select '2' in the SNMP configuration menu and press Enter, the following screen will
appear:
Please input traps-host IP address (A.B.C.D):
When the user enters a valid IP address for Traps host and presses Enter, the
following appears:
Please input traps community string[public]:
Note: the valid length for a traps community string is 1 to 255 characters, the default
value is 'public'. When a valid traps community string is entered, press Enter returns to the
SNMP configuration menu.
Select '3' in the SNMP configuration menu and press Enter, the following screen will
appear:
DCS-3950 series Ethernet switch manual
21