Answering system
Answering system settings
Call screening
You can choose whether or not incoming messages are played through the
speaker on the telephone base while they are being recorded. However,
whether the call screening is on or off, the incoming messages can always be
played through the handset.
To change the settings:
1.
Press MENU/
Press CID or DIR to scroll to Answering sys, then
2.
/SELECT.
press
MENU
3.
Press CID or DIR to scroll to Ans sys setup, then
press
/SELECT.
MENU
/SELECT again to select Call screening.
4.
Press
MENU
Press CID or DIR to choose On or Off.
5.
/SELECT to save your setting.
6.
Press
MENU
NOTE: For more details about the features of call screening, see Call screening on page 62.
when the handset is idle.
SELECT
56
Call screening
ECO
On
ECO