Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call from a handset:
1. During the call, press MENU/
/SELECT to choose Transfer.
2. Press
MENU
•
If you have one handset, the outside call is put on
hold and your handset shows Transferring call... The
telephone base rings and shows
Transfer from HANDSET X.
•
If you have more than one handset, your screen shows
TRANSFER TO: Use the dialing keys to enter a specific
device number (0 for the telephone base, 1-9 for
handsets 1-9,
10-12, or TONE followed by # for all devices),
q
press
CID
press
MENU
and your handset screen shows Transferring call... or
Transferring call to all...
shows Transfer from HANDSET X
name, X represents the handset number).
3. To answer the call on the destination handset, press
/SPEAKER. To answer the call on the telephone base, press
/SPEAKER. The initiating handset shows Call transferred and goes to
idle mode.
TONE followed by 0-2 for handsets
or p
to scroll to the desired device and
DIR
/SELECT.
The outside call is put on hold
The other device rings and
.
SELECT
(HANDSET represents the handset
43
Phone
10/15
>Transfer
Intercom
or
TRANSFER TO:
>Handset
PHONE/
FLASH
0:00:12
AM
10:01
p
q
2
p
q
or