Blind Transfer - AT&T CL83519 User Manual

Telephone operation
Options while on calls

Blind transfer

device without notifying them.
To transfer an outside call from a cordless handset:
1. During the call, press MENU/
2. Press or
CID
If you have one handset and no other registered devices, the outside call
is put on hold and your handset shows Transferring call.... The telephone
base rings and shows Transfer from HANDSET X.
If you have other registered device(s) or more than one handset, your
screen shows TRANSFER TO:. Use the dialing keys to enter a specific device
number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, or TONE followed by # for all devices), or press
or
CID
outside call is put on hold and your handset screen shows Transferring
call... or Transferring call to all.... The other device rings and shows
Transfer from HANDSET X (HANDSET represents the handset name,
X represents the handset number).
3. To answer the call on the destination handset, press PHONE/
/SPEAKER. To answer the call on the telephone base, press
The initiating handset shows Call transferred and goes to idle mode.
To transfer an outside call from the telephone base:
1. During the call, press MENU/
2. Press or
CID
If your have one handset and no other registered devices, the outside
call is put on hold and the telephone base shows Transferring call.... The
handset rings and shows Transfer from BASE 0 (BASE represents the
base name).
to scroll Transfer, then press
DIR
to scroll to the desired device and press
DIR
to scroll Transfer, then press
DIR
.
SELECT
.
SELECT
31
/SELECT.
MENU
/SELECT. The
MENU
FLASH
/SPEAKER.
/SELECT.
MENU
or