On The Version Indication; Turning Off; Basic Operation During A Meeting; Calling A Remote Party - Sony PCS-1500 Service Manual

Turning the System On/Off

On the Version Indication

You can check the Compact Processor version with the
Machine Information menu.
For details on the Machine Information menu, see "Machine
Information menu" on page 77.
Machine Information
HOST VERSION: Ver1.00
BRI VERSION: Ver3.28
VCP VERSION: Ver1.16
DSP VERSION: Ver1.00
Machine Information menu

Turning Off

The following describes how to turn off the Compact
Processor.
1
Set the POWER switch on the rear of the Compact
Processor to off.
2
Turn off the power of any other equipment to be used
during the meeting.
Notes
• If you are not going to use the system for an extended period,
set the POWER switch to off.
• You cannot receive any calls from remote parties if the
POWER switch is set to off.
22
Chapter 1 Preparation
Exit: CANCEL
Basic Operation
During a Meeting

Calling a Remote Party

You can start a meeting with a remote party by dialing. Once
you have made a connection with the remote party, you can
begin talking just like normal phone call.
The following describes how to call a remote party.
You have to register your local system data and set up the
Compact Processor before starting a meeting.
For details on registration and setup, see Chapter 4
"Registration and Setup."
Chapter 2 Basic Operation During a Meeting
Chapter
23