Address Pool Configuration; Clear Ip Pool Conflict-Ip - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
3
C h a p t e r
Address Pool
Configuration
Table of Contents
clear ip pool conflict-ip .......................................................19
conflict-time .....................................................................20
distribute ip pool ...............................................................20
exclude ............................................................................21
ip local pool ......................................................................21
ip pool .............................................................................22
network ...........................................................................22
range...............................................................................23
show ip local pool ..............................................................24

clear ip pool conflict-ip

Use this command to clear the conflict-ip in ip pool.
Privileged EXEC
clear ip pool conflict-ip { all |[ pool <pool-name>]}[ slot <npc
-num>]
<pool-name>
<npc-num>
The platform version 4.08.22 and upgrade versions support this
command.
This example describes how to clear the conflict-ip in ip pool.
ZXR10#clear ip pool conflict-ip all
Confidential and Proprietary Information of ZTE CORPORATION
The ip pool name, 1~16 characters.
The number of npc, for distributed mode
display.
19