Icom IC-E80D Instruction Manual page 143

D TX call sign display (TX CS)
Selects call sign display function from YOUR, MY or OFF.
When this setting is set to YOUR or MY, the transceiver auto-
matically displays the set station or your own call sign during
DV mode transmission.
D RX message display (RX MSG)
Sets auto received message display function AUTO or OFF.
When this setting is set to AUTO, the transceiver automati-
cally displays and scrolls the received message.
D Scroll speed (SCROLL)
Set the displayed message, call sign, etc. scrolling speed.
• FAST : Scroll speed is set to fast.
• SLOW : Scroll speed is set to slow.
(default: YOUR)
D Break-in function (BK)
The break-in function allows you to break into a conversation
where the two original stations are communicating with call
sign squelch enabled. See pages 72, 73 for details.
• OFF
• ON
(default: AUTO)
NOTE: The break-in function is turned OFF automatically
when turning transceiver's power OFF.
MENU SCREEN OPERATION
(default)
: The break-in function is set to OFF.
: The break-in function is set to ON.
- "BK" appears on the display.
12
1
2
3
4
5
6
7
8
9
10
(default)
11
12
13
14
15
16
17
18
19
135