Icom IC-E80D Instruction Manual page 69

D Calling a specific station
q Set the desired frequency. (p. 23)
• Select output power, if desired. (p. 27)
w Set the current call sign to your own call sign. (p. 47)
e Set the current UR call sign. (p. 47)
UR call sign selection
q Push and hold [UR](.) for 1 sec. to enter UR call sign
selection mode.
• Push [BAND] several times to select "GRP CQ" (CQCQCQ)
"GRP UR" (UR call sign memories) and "CS" (current call
sign).
• DV mode is automatically selected.
w Rotate [DIAL] to select the specific station call sign.
e Push [UR](.) to return to the frequency screen.
r Push and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Tx/Rx indicator lights red and the RF meter shows the output
power.
• UR call sign is displayed and scrolled on the frequency display
depending on "TX CS" setting (p. 135).
DV MODE OPERATION
t Release [PTT] to return to receive.
• The other station's call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 49 for details.
• Current call sign setting example (Simplex call)
Station call sign
JG3YMK
UR
R1: (NOT USE)
NOTE: The digital mode operation is vastly different from
FM mode. One of the differences is that in digital mode
the squelch does not function as in FM mode. Changing
the squelch setting will not open it to hear the hiss of
"white noise." It only activates for digital squelch functions
such as CSQL
(Digital code squelch)
.
sign squelch)
7
My call sign
JA3YUA
MY
R2: (NOT USE)
or D SQL
(Digital call
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
61