Icom IC-E80D Instruction Manual page 146

12
MENU SCREEN OPERATION
D GPS-TX mode items (GPS-TX)
Sets the transmission of data from a connected GPS receiver
ON and OFF.
When the position information is received from a connected
GPS receiver and GPS.ATX (GPS Auto TX Timer) setting
(p. 142) is set to a specific time, the transceiver automatically
transmits the current position and message at the set inter-
val.
• OFF : Transmitting position data is disabled.
• DVG : Transmitting position data in GPS mode.
• DVA : Transmitting position data in GPS-A mode.
138
Sentence formatter setting
q Select "DVG" in GPS-TX mode item, then push [ ](5) to
enter the sentence formatter selection.
w Push [
formatter.
• RMC, GGA, GLL, GSA, VTG and GSV are selectable.
(default)
RMC sentence
e Push [ ](5) to enter the desired sentence formatter
selection.
r Push [ ](2) or [ ](8) to select the setting.
• See right above for setting details.
RMC sentence: OFF
t Push [ ](5) to set ON/OFF.
y Push [ ](2) or [ ](8) to select next sentence and repeat
steps w to t, or push [MENU
frequency screen.
• No more than four sentence formatters can be activate
simultaneously.
](2) or [ ](8) to select the desired sentence
GGA sentence
RMC sentence: ON
(Continue to the next page.)
] to return to the