How To Use "Dial/Disconnect - Sony IPELS PCS-TL50 Operating Instructions Manual

5. How to use "Dial/Disconnect"

By clicking the [Dial/Disconnect] button, you can jump to the "Dial/Disconnect" page.
• To connect:
A Enter the telephone number(s) of a remote party into the box(es): A1( to C2) (When using a LAN, enter an IP address
or a DNS name.)
B Set the communication attribute.
C Click the [DIAL] button.
D The message, "Now dialing..." appears.
E After the connection is made, the message, "Connect OK." will appear, and the screen will return to the "Dial/
Disconnect" page.
• To disconnect:
A Click the [DISCONNECT] button.
B The message, "Now disconnecting..." appears.
C After the disconnection is completed, the message "Disconnect OK." will appear, and the screen will return to the
"Dial/Disconnect" page.
• To clear the dial number:
A Click the [CLEAR] button.
B The number(s) entered on this menu will be cleared and the screen will return to the "Dial/Disconnect" page.
Note
When More Options Enable is set to Off in the Dial Setup menu, only Line I/F and LAN Bandwidth are displayed.
8
5. How to use "Dial/Disconnect"