How to use "Dial/Disconnect"
By clicking the [Dial/Disconnect] button, you can jump to the "Dial/
Disconnect" page.
For Peer-to-Peer Connection
To connect:
1 Enter an IP address or a DNS name of a remote party into box A. (Enter
that of another remote party into box B or C, if necessary.)
2 Select the dial mode in "Dial Mode" and set up the other items as required.
3 Click the [DIAL] button.
4 The message, "Now dialing..." appears.
5 After the connection is made, the message, "Connect OK." will appear, and
the screen will return to the "Dial/Disconnect" page.
To disconnect:
1 Click the [DISCONNECT] button.
2 The message, "Now disconnecting..." appears.
3 After the disconnection is completed, the message "Disconnect OK." will
appear, and the screen will return to the "Dial/Disconnect" page.
To clear the dial number:
1 Click the [CLEAR] button.
2 The number(s) entered on this menu will be cleared and the screen will
return to the "Dial/Disconnect" page.
How to use "Dial/Disconnect"
149