Preparing For A Videoconference With The Ipela Vc Link Function - Sony IPELA PCS-TL50 Manual
Video communication system
ipela vc link guide
Hide thumbs
Also See for IPELA PCS-TL50:
- Quick connection manual (2 pages) ,
- Operating instructions manual (283 pages) ,
- Operating instructions manual (243 pages)
Table of Contents
Advertisement
Connecting to an external server with the IPELA VC Link
function enables you to use the IPELA VC Link service.
This guide describes the procedures and settings needed to
use the IPELA VC Link service.
IPELA VC Link service is only available in Japan.
For more about the IPELA VC Link service, consult your
Sony dealer.
Preparing for a
Videoconference With the
IPELA VC Link Function
1
After entering an extension command with “Function
Extension Command” on Page 3 of the Administrator
Setup menu, select “Save,” then press the ENTER
button on the Remote Commander.
Administrator Setup
3/3
Web Monitor
On
Enabled
Web Access
Save Setup
Load Setup
Function Extension Command
Save
Cancel
The screen switches to the Setup menu.
Notes
• For details on obtaining the “Function Extension
Command,” consult your Sony dealer.
• If the “SIP Server Mode” setting is set to “On” on the
SIP Setup menu, an error message appears, and
IPELA VC Link does not activate. Set “SIP Server
Mode” to “Off” before entering the “Function
Extension Command” again.
• The SIP Setup menu is displayed when the optional
SIP software has been installed.
2
With the “IPELA VC Link” is selected, press the
ENTER button.
Setup
Answer
Dial
General
Audio
Administrator
LAN
ISDN
Multipoint
Status
Information
Encryption
IPELA VC Link
Page 2
Advertisement
Table of Contents
