Preparing For A Videoconference With The Ipela Vc Link Function - Sony IPELA PCS-TL33 Manual

Connecting to an external server with the IPELA VC Link
function enables you to use the IPELA VC Link service.
This guide describes the procedures and settings needed to
use the IPELA VC Link service.
IPELA VC Link service is only available in Japan.
For more about the IPELA VC Link service, consult your
Sony dealer.
2

Preparing for a Videoconference With the IPELA VC Link Function

Preparing for a
Videoconference With the
IPELA VC Link Function
1
Enter an extension command with "Function
Extension Command" on Page 10 of the
Administrator Setup menu, and click [OK].
Administrator Setup
Capture remote image
Ringer with headphones
Display DTMF button
Auto Restore
Restore factory defaults
Save Application Software
Update software
Memory Stick Format
Save Setup
Load Setup
Function Extension Command
Right-click the mouse to display a help message.
The Network Setup menu switches to the "IPELA VC
Link" screen.
Notes
• For details on obtaining the "Function Extension
Command," consult your Sony dealer.
• If the "SIP Server Mode" setting is set to "On" on
Page 1 of SIP on the Network Setup menu, an error
message appears, and IPELA VC Link does not
activate. Set "SIP Server Mode" to "Off" before
entering the "Function Extension Command" again.
2
Set "Use IPELA VC Link" to "On," and enter an
"IPELA VC Link Number" and "Password."
Note
For details on acquiring an IPELA VC Link number
and password, consult your Sony dealer.
IPELA VC Link
LAN
Enable IPELA VC Link
IPELA VC Link
IPELA VC Link Number
SIP
Password
Right-click to display the help file.
10/11
On Off
On Off
On Off
On Off
Start
Save
Start
Start
Save
Load
OK Cancel
IP:012.345.678.912
1/3
On Off
12345678
OK Cancel
IP: 012.345.678.912