Changing Subnet Mask; Changing Default Gateway; Changing Dns Server Address; Changing Alternate Dns Server Address - Network Technologies ENVIROMUX-SEMS-16 Installation And Operation Manual

NTI SERVER ENVIRONMENT MONITORING SYSTEM

Changing Subnet Mask

To change subnet mask, hit <4> from Network Configuration Menu.
Enter new Subnet Mask (255.255.255.0):
The current subnet mask is displayed between parentheses. Type a new subnet mask and hit <Enter> or just hit <Enter> to keep
the current mask unchanged. The display will return to Network Configuration Submenu. When typing new subnet mask the
<Backspace> key can be used to correct typing errors.

Changing Default Gateway

To change default gateway address, hit <5> from Network Configuration Menu.
Enter new Default Gateway (192.168.1.1):
The current default gateway address is displayed between parentheses. Type a new address and hit <Enter> or just hit <Enter>
to keep the current address unchanged. The display will return to Network Configuration Submenu. When typing a new gateway
address the <Backspace> key can be used to correct typing errors.

Changing DNS Server Address

To change DNS Server address, hit <6> from Network Configuration Menu.
Enter new DNS Server (192.168.1.2):
The current DNS server address is displayed between parentheses. Type a new address and hit <Enter> or just hit <Enter> to
keep the current address unchanged. The display will return to Network Configuration Submenu. When typing new DNS server
address the <Backspace> key can be used to correct typing errors.

Changing Alternate DNS Server Address

To change Alternate DNS Server address, press <7> from Network Configuration Menu.
Enter new DNS Server (192.168.1.2):
The current Alternate DNS server address is displayed between parentheses. Type a new address and hit <Enter> or just hit
<Enter> to keep the current address unchanged. The display will return to Network Configuration Submenu. When typing new
alternate DNS server address the <Backspace> key can be used to correct typing errors.

Changing HTTP Server Port settings

To change the HTTP Server Port from the default port 80 to a secure port, press <8> from Network Configuration Menu.
Enter new HTTP Server Port (80):
The current HTTP server port assignment is displayed between parentheses. Type a new port number and hit <Enter> or just hit
<Enter> to keep the current port number unchanged. The display will return to Network Configuration Submenu. When typing new
HTTP port server number the <Backspace> key can be used to correct typing errors.

Changing SMTP server settings

SMTP Server is used to send e-mail notification to the configured users. The IP address of the server and port have to be
configured before being able to use it. The default port for an SMTP server is 25. If your current SMTP server uses a port number
other than the default, the ENVIROMUX should be configured accordingly.
To change SMTP Server address press <9> from Network Configuration Menu. The system will prompt for a name, displaying the
old name between parentheses. If the operator introduces a valid server (which can be a numeric IP address or a literal) the
system will save the new value into the permanent storage. The system does not check for the presence of the server or if the
name can be resolved by the DNS. The operator has to assure that the server name introduced is operational, otherwise the e-
mail messages will not be sent.
55