Network Configuration Submenu; Changing Mac Address; Toggle Dhcp Mode; Changing Ip Address - Network Technologies ENVIROMUX-SEMS-16 Installation And Operation Manual

NTI SERVER ENVIRONMENT MONITORING SYSTEM

Network Configuration Submenu

To enter into this submenu, <3> from Main Menu. The following submenu will be displayed:
NETWORK CONFIGURATION
========================
1. Change MAC Address
2.

Toggle DHCP Mode

3. Change IP Address
4. Change Subnet Mask
5. Change Default Gateway
6. Change Preferred DNS Server
7. Change Alternate DNS Server
8. Change HTTP Server Port
9. Change SMTP Server
A. Change SMTP Port
B. Enable/Disable SMTP Authentication
C. Change SMTP User Name
D. Change SMTP Password
0. Return to Main Menu
Enter Option >
Hit a key from <1> to <8> or <A> to <D> to edit the corresponding variables or <0> to return back to Main Menu

Changing MAC Address

To change the MAC address, hit <1> from Network Configuration Menu.
Enter new MAC Address (00:40:9D:23:EA:E9):
The current MAC Address is displayed between parentheses. Type a new MAC address and hit <Enter> or just hit <Enter> to
keep the current address unchanged. The display will return to Network Configuration submenu. When typing a new MAC
Address, the <Backspace> key can be used to correct typing errors.
Toggle DHCP Mode
Note: Make sure the ENVIROMUX-SEMS-16 is connected to a network with a DHCP server attached prior to changing this
setting to "dynamic IP Address".
The system can use a manually assigned IP Address that will not change ("static"), or can get its IP Address from a DHCP server
("dynamic"). When selecting to toggle the mode (by pressing <2>), the current mode will be displayed and the user will be asked if
he wants to change. By pressing <y> or <Y>, the user will toggle the DHCP mode:
The unit uses a static IP Address.
Do you want to toggle the status? (y/n):
Pressing any other key will cancel the operation.

Changing IP Address

To change IP address, hit <3> from Network Configuration Menu.
Enter new IP Address (192.168.1.21):
The current IP Address is displayed between parentheses. Type a new IP address and hit <Enter> or just hit <Enter> to keep the
current address unchanged. The display will return to Network Configuration submenu. When typing a new IP Address the
<Backspace> key can be used to correct typing errors.
54