Advanced-Cascade Configuration; Figure 43- Cascade Configuration With Local Slaves; Figure 44- Master With Local Slaves - Network Technologies ENVIROMUX-SEMS-16 Installation And Operation Manual

NTI SERVER ENVIRONMENT MONITORING SYSTEM

Advanced-Cascade Configuration

From the Administration->Advanced>Cascade menu, the administrator can configure the ENVIROMUX to either be
Note: When ENVIROMUX units are connected as slaves, only their sensors and output relays are used and are monitored
through the master unit.
If local slaves are connected,
1. Go to the Cascade Configuration page for each ENVIROMUX and using the choices in the drop down box on , select
the position each ENVIROMUX will hold in the cascaded system (examples seen in Figure 43).
2. Press "Apply".
3. Connect the slaves to the master as shown below using CAT5/5e/6 patch cables with RJ45 connectors wired straight
thru (pin 1 to pin 1, pin 2 to pin 2, etc. ) (max. 25 feet long).
4. Power cycle each slave unit
5. Power cycle the master unit
Sensors attached to the connected slaves will appear when viewing the Summary Page for the master. The Beacon and Siren
connections of the slave units are not used.
MASTER CONFIGURATION
NTI
R
NETWORK TECHNOLOGIES INC 1275 Danner Dr, Aur ora, OH 44202
(Local Slave #1)
REAR VIEW OF ENVIROMUX-SEMS-16
1 2 3
RJ45 SENSO RS
+ 12V + 12V + 12V
NTI
R
NETWORK TECHNOLOGIES INC 1275 Danner Dr, Aurora, OH 44202 Tel :330-562-7070 www. n etworktechinc . com
(Local Slave #2)
REAR VIEW OF ENVIROMUX-SEMS-16
RJ45 SENSO RS
NTI
R
NETWORK TECHNOLOGIES INC 1275 Danner Dr, Aurora, OH 44202 Tel :330-562-707 0 www. n etworktechinc. com
a standalone master system,
•
a master with up to 3 Ethernet slaves (Ethernet connected)
•
a master with up to 3 local slaves (directly connected)
•
an Ethernet slave
•
a local slave #1, #2, or #3
•

Figure 43- Cascade configuration with local slaves

("Master with 3 Local Slaves" )
REAR VIEW OF ENVIROMUX-SEMS-16
DIGITAL IN
1 2 3 4 5 6
RJ45 SENSORS
+ 12V + 12V + 12V + 12V + 12V + 12V + 12V
Tel:330-562-7070 ww w.networktechinc.com
RJ45-male
connector
DIG ITAL IN
AUX AUX PWR
4 5 6 7 8 BEACO N SIREN
+ 12V + 12V + 12V + 12V + 12V +12 V +12 V +12 V
OUT
DIG ITAL OUT
CONSOLE
1 2 3 4
IN ETHERNET
DIG ITAL IN AUX
BEACO N SIREN AUX PWR
1 2 3 4 5 6 7 8
+ 12V + 12V + 12V + 12V + 12V + 12V + 12V + 12V +12 V +12 V +12 V
OUT
DIG ITAL OUT CONSOLE
1 2 3 4
IN
ETHERNET

Figure 44- Master with local slaves

Note: The master and each slave must be power cycled
for changes to take effect.
SLAVE CONFIGURATION
AUX
BEACON SIREN AUX PWR
7 8
+12V +12V +12V
+ 12V
OUT
OUTPUT RELAYS
CONSOLE
1 2 3 4
IN
ETHERNET
RJ45-male
connector
MAXIMUM CABLE LENGTH FOR CASCADED
LOCAL CONNECTION IS 25 FEET
(Local Slave #3)
REAR VIEW OF ENVIROMUX-SEMS-16
RJ45 SENSO RS
NTI
R
NETWORK TECHNOLOGIES INC 1275 Danner Dr, Aurora, OH 44202 Tel :330-562-7 070 www. n etworktechinc. com
43
DIG ITAL IN
BEACO N SIREN AUX AUX PWR
1 2 3 4 5 6 7 8
+ 12V + 12V + 12V + 12V + 12V + 12V + 12V + 12V +12 V +12 V +12 V
OUT
DIG ITAL OUT
CONSOLE
1 2 3 4
IN ETHERNET