Reboot/Shutdown; Figure 49- Reboot/Shutdown Page; Figure 50- Reboot Confirmation Prompt - Network Technologies ENVIROMUX-SEMS-16 Installation And Operation Manual

NTI SERVER ENVIRONMENT MONITORING SYSTEM

REBOOT/SHUTDOWN

If a user wants to remotely reboot the ENVIROMUX to refresh settings (such as after changing settings in the SNMP Agent page
(page 38), or if the user wants to shut down the ENVIROMUX during a power-failure, the REBOOT/SHUTDOWN page under the
Administration section can be used.
The REBOOT/SHUTDOWN page shows the current status of the power supply(s) and backup battery (page 65). Click on the
"Reboot" button" to force the ENVIROMUX to shut down and then restore itself to normal operation.
that were made prior to this action will be made active.
Note: In the event of a power failure, using REBOOT will cause the ENVIROMUX to shut OFF.
Click on the "Shut Down" button to shut down the ENVIROMUX in the event of a power failure. During a power failure , this will
be the only way the ENVIROMUX can be shut OFF. The battery backup will power the ENVIROMUX for up to 1 hour.
The power switch will only shut down the ENVIROMUX during normal operation.
will be reminded to also shut OFF the power switch on the ENVIROMUX.
has been restored the ENVIROMUX will power ON automatically.
Note: If power is shutdown during a power failure, you will not be able to power ON the ENVIROMUX until after AC power
has been restored.
Note: When using SHUTDOWN or REBOOT button, the user will be prompted to confirm the action (image below) before
completing the action.

Figure 49- Reboot/Shutdown page

Figure 50- Reboot confirmation prompt

47
Any configuration changes
When using the "Shut Down" button, the user
If the power switch is not shut OFF, when AC power