Chapter 10. Wand Emulation Interface; Introduction; Wand Emulation Standard Factory Settings; Wand Idle State - Datalogic QuickScan i Product Reference Manual

Introduction

This chapter provides feature/settings configuration for the Wand Emulation interface.

Wand Emulation Standard Factory Settings

Reference

Wand Idle State

This feature specifies the level of the Wand output signal when the reader is idle.
Wand Idle State = High
Product Reference Guide
Wand Emulation Interface
Appendix B, Standard Defaults
TTL logic levels:
0V <= Low <= 0.7V
2.4V <= High <= 5.25V
NOTE
ENTER/EXIT PROGRAMMING MODE
Chapter 10
for a listing of standard factory settings.
Wand Idle State = Low
DEFAULT
91