The Firmware Version of the unit is displayed on the LCD. Press <4> or <6> key to see other i
tems of the menu on [F9 SETUP MENU].
9.2
Input Test
The 5-digit number shows the input status, where "0" indicates that the input port is open ci
rcuit, and "1" indicates that the input port is short circuit to the ground level, and, finally, "2"
indicates that the input port is disconnected.
9.3
Output Test
The first two tests verify the output relays (Door Relay and Alarm Relay) are working properl
y. You can hear the mechanical sound of relays and see the LED blink. The next two tests ar
e to verify TTL#1 and TTL#2 outputs. Finally, the last test is for an Internal Buzzer test. You c
an hear two beeps during the test.
9.4
LCD Test
p.74
Setting Changes