Cleaning The Station Interior [Station]-[Carriage Out] - MIMAKI GP-1810 Operation Manual

Cleaning the station interior [Station]-[Carriage Out]

Move the carriage when cleaning the station interior and replacing the consumable parts.
• Do not move the carriage out of the capping station by hand.
Use the appropriate operation key to move the carriage.
STEPS:
1. Press the [ ] or [ ] keys to select [Station].
2. Press the [ENTER] key.
3. Press the [ENTER] key.
4. Open the station cover, then perform the fol-
lowing maintenance works for the station
interior.
1. Cleaning the ink caps.
2. Cleaning the wiper.
3. Cleaning the ink at the bottom of the slider.
4. Replacing the flushing tray ink absorber.
5.
Changing the wiper. (
When the message [Replace Wiper] is displayed on the LCD, replace the wiper.
5. Close the station cover, then press the [EN-
TER] key.
6. The machine enters the LOCAL mode.
( page 3.4)
( page 3.4)
(
page 5.9)
- 5.8 -
MAINTENANCE
Station
Station Maint
Sel
Carriage Out
Completed
( page 3.3)
page 3.10)
X =1010
< ent>
: Carriage Out
: ent
Initialize
Please Wait
<< LOCAL >>
Y = 1860