Table of Contents
Advertisement
AUTO CUT
Set whether or not to cut the media automatically after completion of printing.
Available setting values: [ON, OFF]
The media will be cut after the lapse of the time to wait for ink drying after completion of printing, if hav-
ing been set.
The setting values for each user type are stored separately from those for other user types.
PRE-FEED
Set whether or not to feed the media back and forth before printing to prevent the media from sticking to
the platen.
Available setting values: [ON, OFF]
The setting values for each user type are stored separately from those for other user types.
MARGIN
Set a non-printing area along the right and left edges of the media
Left margin
Set the width of the non-printing area along the left edge of the media.
Available setting values: [-10 ~ 85 mm] (In steps of 1 mm)
Right margin
Set the width of the non-printing area along the right edge of the media.
Available setting values: [-10 ~ 85 mm] (In steps of 1 mm)
The setting values for each user type are stored separately from those for other user types.
COLOR PATTERN
Set whether or not to print a color pattern for nozzle missing check near the right edge of the media.
Available setting values: [ON, OFF]
When the pattern is to be printed, the printing location of image data is shifted by 18 mm from the origin in
the scanning direction.
The setting values for each user type are stored separately from those for other user types.
4-color mode
Image
Origin
18 mm
Check pattern
6-color mode
6-9
Advertisement
Table of Contents
