Cisco Unified Ip Phone Installation; Install Cisco Unified Ip Phone 7975G, 7971G-Ge, 7970G, 7965G, And 7945G - Cisco 7975G Software Manual

Cisco Unified IP Phone Installation

See the Cisco Unified Communications Manager Administration Guide:
• "End User Configuration" chapter
• "User Group Configuration" chapter
Step 11 Associate a user with a phone. Provides users with control over their phone so that they can forward calls or
add speed-dial numbers or services.
Note
See the Cisco Unified Communications Manager Administration Guide, "End User Configuration" chapter.
Cisco Unified IP Phone Installation
After you add the phones to the Cisco Unified Communications Manager database, you can complete the
phone installation. You can install the phones at the desired locations, or you can give the phone users the
information they need to perform the installation. The Cisco Unified IP Phone Installation Guide, which is
available at http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html,
provides directions for connecting the phone foot stand, handset, cables, and other accessories.
Upgrade the phone to the current firmware image before installation. For information about phone upgrades,
Note
see the Readme file for your phone model located at:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
After the phone connects to the network, the phone startup process begins, and the phone registers with
Cisco Unified Communications Manager. To complete phone installation, configure the network settings on
the phone depending on whether you enable or disable DHCP service.
If you used autoregistration, update the specific configuration information for the phone: associate the phone
with a user, change the button table, or assign a directory number.

Install Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G

The following steps provide an overview and checklist of installation tasks for the Cisco Unified IP Phone
7975G, 7971G-GE, 7970G, 7965G, and 7945G. The steps present a suggested order to guide you through the
phone installation. Some tasks are optional, depending on your system and user needs. For detailed procedures
and information, see the sources in the steps.
Procedure
Step 1 Choose the power source for the phone:
a) Power over Ethernet (PoE)
b) External power supply
Determines how the phone receives power.
See
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
26
Some phones, such as those in conference rooms, do not have an associated
user.
Cisco Unified IP Phone Power, on page 31.
Cisco Unified IP Phone