Set Up User Options Web Page Options; Energywise Setup On Cisco Unified Ip Phone - Cisco 7975G Software Manual

Features, Templates, Services, and Users
• Show Line Text Label Settings
• Show Call Forwarding
Note The settings apply to all User Options web pages at your site.

Set Up User Options Web Page Options

To specify the options that appear on the User Options web pages, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters.
The Enterprise Parameters Configuration window displays.
Step 2 In the CCMUser Parameters area, specify if a parameter appears on the User Options web pages by choosing
one of these values from the Parameter Value drop-down list box for the parameter:
• True—Option displays on the User Options web pages (default).
• False—Option does not display on the User Options web pages.
• Show All Settings—All call forward settings display on the User Options web pages (default).
• Hide All Settings—No call forward settings display on the User Options web pages.
• Show Only Call Forward All—Only call forward all calls displays on the User Options web pages.

EnergyWise Setup on Cisco Unified IP Phone

To reduce power consumption, you can configure the phone to sleep (power down) and wake (power up) if
your system includes an EnergyWise controller (for example, a Cisco Switch with the EnergyWise feature
enabled).
You configure settings in Cisco Unified Communications Manager Administration to enable EnergyWise and
configure sleep and wake times. These parameters are closely tied to the phone display configuration parameters.
When EnergyWise is enabled and a sleep time is set, the phone sends a request to the switch to wake it up at
the configured time. The switch sends back either an acceptance or a rejection of the request. If the switch
rejects the request or if the switch does not reply, the phone does not power down. If the switch accepts the
request, the idle phone goes to sleep, reducing its power consumption to a predetermined level. A phone that
is not idle sets an idle timer, and goes to sleep after the timer expires.
At the scheduled wake time, the system restores power to the phone, waking it up. To wake up the phone
before the wake time, you must power on the phone from the switch. For more information, see the switch
documentation.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
EnergyWise Setup on Cisco Unified IP Phone
Communications Manager 9.0 (SCCP and SIP)
157