Cisco 7975G Software Manual page 160

Telephony Features Available for Cisco Unified IP Phone
Feature Description
Privacy Prevents users who share a line from adding themselves
to a call and from viewing information on their phone
screens about the call of the other user.
Programmable Line Keys The administrator can assign features to line buttons.
Softkeys normally control these features; for example,
New Call, Call Back, End Call, and Forward All. When
the administrator configures these features on the line
buttons, they always remain visible, so users can have a
"hard" New Call key.
Protected Calling Provides a secure (encrypted) connection between two
phones. A security tone is played at the beginning of the
call to indicate that both phones are protected. Some
features, such as conference calling, shared lines,
Extension Mobility, and Join Across Lines are not
available when protected calling is configured. Protected
calls are not authenticated.
Quality Reporting Tool Allows users to use the QRT softkey on a phone to submit
(QRT) information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.
Redial Allows users to call the most recently dialed phone
number by pressing a softkey.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
140
Features, Templates, Services, and Users
Configuration reference
For more information, see:
• Cisco Unified Communications
Manager Administration Guide, "Cisco
Unified IP Phone Configuration" chapter
• Cisco Unified Communications
Manager System Guide, "Cisco Unified
IP Phones" chapter
• Cisco Unified Communications
Manager Features and Services Guide,
"Barge and Privacy" chapter
For more information, see:
• Cisco Unified Communications
Manager System Guide, "Cisco Unified
IP Phone" chapter
• Cisco Unified Communications
Manager Administration Guide, "Phone
Button Template Configuration" chapter
For more information about security, see
Supported Security Features, on page
For additional information, see the Cisco
Unified Communications Manager Security
Guide, "Configuring a Phone Security Profile"
chapter.
For more information, see:
• Cisco Unified Communications
Manager System Guide, "Cisco Unified
IP Phones" chapter
• Cisco Unified Communications
Manager Features and Services Guide,
"Quality Report Tool" chapter
No configuration required.
15.