Set Up Ucr 2008 In Common Phone Profile Configuration Window; Set Up Ucr 2008 In Enterprise Phone Configuration Window - Cisco 7975G Software Manual

Set Up UCR 2008 in Common Phone Profile Configuration Window

Procedure
Step 1 Choose Device > Phone.
Step 2 Set the SSH Access parameter to Disabled.
Step 3 Set the Web Access parameter to Disabled.
Step 4
Set the HTTPS Service parameter to HTTPS only.
Step 5 Click Save.
Set Up UCR 2008 in Common Phone Profile Configuration Window
Use this procedure to set the following parameters:
• FIPS Mode
• SSH Access
• 80-bit SRTCP
Procedure
Step 1 Choose Device > Device Settings > Common Phone Profile.
Step 2 Set the FIPS Mode parameter to Enabled.
Step 3
Set the SSH Access parameter to Disabled.
Step 4 Set the 80-bit SRTCP parameter to Enabled.
Step 5 Click Save.

Set Up UCR 2008 in Enterprise Phone Configuration Window

Use this procedure to set the following parameters:
• FIPS Mode
• HTTPS Server
• 80-bit SRTCP
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
162
Features, Templates, Services, and Users