Cisco 7975G Software Manual page 114

UI Configuration Menu
Table 23: UI Configuration Menu Options
Option
Auto Line Select
BLF for Call Lists
Reverting Focus
Priority
Auto Call Select
"more" Softkey
Timer
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
94
Description
Indicates whether the phone shifts the call
focus to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the
line that is in use. When this option is enabled,
the phone shifts the call focus to the line with
the most recent incoming call.
Default: Disabled
Indicates whether the Busy Lamp Field (BLF)
is enabled for call lists.
Indicates whether the phone shifts the call
focus on the phone screen to an incoming call
or a reverting hold call. Settings include:
Lower: Focus priority given to incoming calls.
Higher: Focus priority given to reverting calls.
Even: Focus priority given to the first call.
Indicates whether the phone automatically
shifts the call focus to an incoming call on the
same line when the user is already on a call.
When this option is enabled, the phone shifts
the call focus to the most recent incoming call.
When this option is disabled, all automatic
focus changes, including Auto Line Select,
are disabled regardless of their setting.
Default: Enabled
Indicates the number of seconds that
additional softkeys display after the user
presses more. If this timer expires before the
user presses another softkey, the display
reverts to the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
Cisco Unified IP Phone Settings
To change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
System > Enterprise Parameters.
From Cisco Unified Communications
Manager Administration, choose
System > Device Pool.
See also: Hold Reversion.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.