Cisco 7975G Software Manual page 224

Network Configuration Area
Item
Authentication URL
SW Port Configuration
PC Port Configuration
TFTP Server 2
User Locale
Network Locale
Headset enabled
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
204
Description
URL that the phone uses to validate requests made to the phone web server.
Speed and duplex of the switch port, where:
• A = Auto Negotiate
• 10H = 10-BaseT/half duplex
• 10F = 10-BaseT/full duplex
• 100H = 100-BaseT/half duplex
• 100F = 100-BaseT/full duplex
• 1000H = 1000-BaseT/half duplex
• 1000F = 1000-BaseT/full duplex
• No Link = No connection to the switch port
Speed and duplex of the switch port, where:
• A = Autonegotiate
• 10H = 10-BaseT/half duplex
• 10F = 10-BaseT/full duplex
• 100H = 100-BaseT/half duplex
• 100F = 100-BaseT/full duplex
• 1000H = 1000-BaseT/half duplex
• 1000F = 1000-BaseT/full duplex
• No Link = No connection to the PC port
To configure the setting on multiple phones simultaneously, configure the Remote
Port Configuration in the Enterprise Phone Configuration (System > Enterprise
Phone Configuration).
If the ports are configured for Remote Port Configuration in Unified
Note
CM, the data cannot be changed on the phone.
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
User locale associated with the phone user. Identifies a set of detailed information
to support users, including language, font, date and time formatting, and
alphanumeric keyboard text information.
Network locale associated with the phone user. Identifies a set of detailed
information to support the phone in a specific location, including definitions of
the tones and cadences used by the phone.
Indicates whether the Headset button is enabled on the phone.
Remote Monitoring