Cisco 7975G Software Manual page 87

Cisco Unified IP Phone Settings
Option
IPv6 Configuration
MAC Address
Host Name
Domain Name
Operational VLAN
ID
Description
Internet Protocol v6 address menu. In the IPv6
Configuration menu, you can do the following:
• Enable or disable the phone to use the
IPv6 address that is assigned by the
DHCPv6 server, or to use the IPv6
address that the phone acquires through
Stateless Address Autoconfiguration
(SLAAC).
• Manually set the IPv6 Address, Subnet
Prefix Length, Default Routers, DNSv6
Server, and IPv6 TFTP servers.
For more information on the IPv6 address
fields, see DHCPv6 and Autoconfiguration,
on page 84.
For more information on SLAAC, see
Deploying IPv6 in Unified Communications
Networks with Cisco Unified Communications
Manager at the following location:
http://www.cisco.com/en/US/docs/
voice_ip_comm/cucm/srnd/ipv6/ipv6srnd.html
Unique Media Access Control (MAC) address
of the phone.
Unique host name that the DHCP server
assigned to the phone.
Name of the Domain Name System (DNS)
domain in which the phone resides.
If the phone receives different
Note
domain names from the DHCPv4 and
DHCPv6 servers, the domain name
from the DHCPv6 will take
precedence.
Auxiliary Virtual Local Area Network
(VLAN) configured on a Cisco Catalyst switch
in which the phone is a member.
If the phone has not received an auxiliary
VLAN, this option indicates the
Administrative VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are configured, this
option is blank.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Network Configuration Menu
To Change
Set IPv6 Configuration Fields, on page
76
Display only. Cannot configure.
Display only. Cannot configure.
Set Domain Name Field, on page 76
The phone obtains its Operational
VLAN ID from Cisco Discovery
Protocol (CDP) from the switch to
which the phone is attached. To assign
a VLAN ID manually, use the Admin
VLAN ID option.
Communications Manager 9.0 (SCCP and SIP)
67