Cisco 7975G Software Manual page 76

Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Mount Phone on Wall
See the following figure for a graphical overview of the phone parts.
Figure 4: Parts Used to Wall Mount the Cisco Unified IP Phone
1
2
3
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from
the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which
the handset catches when the phone is vertical. For an illustrated procedure, see Installing the Wall Mount
Kit for the Cisco Unified IP Phone at:
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html
Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.
Caution
Procedure
Step 1
Push in the footstand adjustment button.
Step 2
Adjust the footstand, so it is flat against the back of the phone.
Step 3
Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand.
The keyholes fit standard phone jack mounts.
Step 4
Hang the phone on the wall.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
56
Footstand adjustment button: Raises and lowers adjustment plate
Wall mounting screw holes
Adjustment plate: Raises and lowers phone vertically
Cisco Unified IP Phones Installation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents