Phone Setup; Identify Phone; Set Up Phone Fields - Cisco 7975G Software Manual

Basic Phone Administration Steps
• User ID: Enter the user identification name. Cisco Unified Communications Manager does not permit
Example: johndoe
• Password and Confirm Password: Enter five or more alphanumeric or special characters for the end user
• Last Name: Enter the user last name. You may use the following special characters: =, +, <, >, #, ;, \, ,
Example: doe
• Telephone Number: Enter the primary directory number for the user. End users can have multiple lines
Example: 26640 (John Doe's internal company telephone number)
Step 3 Click Save.
Step 4
Proceed to the section

Phone Setup

To configure the phone, you must first identify the phone and then configure using the following procedures.

Identify Phone

To identify the user phone model and protocol, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager administration, choose Device > Phone.
Step 2 Click Add New.
Step 3 Select the user phone model from the Phone Type drop-down list, then click Next.
Step 4
Select the device protocol (SCCP or SIP) from the drop-down list, then click Next. The Phone Configuration
window appears.

Set Up Phone Fields

On the Phone Configuration window, you can use the default values for most of the fields.
To configure the required fields and some key additional fields, follow these steps:
modifying the user ID after it is created. You may use the following special characters: =, +, <, >, #, ;,
\, , "", and blank spaces.
password. You may use the following special characters: =, +, <, >, #, ;, \, , "", and blank spaces.
"", and blank spaces.
on their phones.
Phone Setup, on page
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
265.
Communications Manager 9.0 (SCCP and SIP)
Phone Setup
265