Chapter 1 Component Names And Led Names; Controller Enclosures; Front; Figure 1.1 Front View Of A 2.5" Type Controller Enclosure - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1
Component Names and LED Names
This chapter provides component names of the ETERNUS DX.
1.1

Controller Enclosures

An operation panel and drives are installed in the front of the controller enclosure. Controllers and power
supply units are installed in the rear.
Note that the shape of the controllers is different in the ETERNUS DX100 S4/DX200 S4 and the ETERNUS
DX100 S3/DX200 S3.
1.1.1

Front

This section provides the names of the components in the front of a controller enclosure.
■
2.5" Type

Figure 1.1 Front View of a 2.5" Type Controller Enclosure

1 2
3
1. Operation panel
2. 2.5" drive
3. Flange cover
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
14
Copyright 2017 FUJITSU LIMITED
3
P3AM-7662-09ENZ0