Configuring As/400 For Ascii Using Tcp/Ip; Configuring With Addtcpifc - Printronix PrintNet P8000 Line User Manual

The following three parameters must be specified:
Line Description (LIND)
The line description name is the user's name for the AS/400
network printer. This name must be identical to the name entered
when the TCP/IP is configured on the AS/400.
Resource Name (RSRCNAME)
The system-assigned name for the interface (for example, LIN041).
SSAP
When *CALC is used, the values of "12" and "AA" are entered
automatically as defaults. Verify that those SSAP values have not
been changed.

Configuring AS/400 for ASCII using TCP/IP

The next step is to configure the interface on the AS/400 for
TCP/IP.
NOTE: The AS/400 interface is not the PrintNet. Do not set the AS/

Configuring with ADDTCPIFC

ADDTCPIFC is used to add a TCP/IP interface to the AS/400. This
step configures the AS/400 for attachments to a TCP/IP network.
At the AS/400 command line, enter the following command:
ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)
SUBNETMASK('255.255.255.0')
Your completed screen should look like Figure 27.
400 interface address to the same address as the PrintNet
IP address. Also, do not add the PrintNet to the AS/400
TCP/IP interface list.
Configuring with ADDTCPIFC
103