Printronix PrintNet P8000 Line User Manual page 195

set sysinfo smtpserver <IPaddress> [port <PORTNUM>]
Example: set sysinfo smtpserver 192.75.11.5 port 25
Define the SMTP (Simple Mail Transfer Protocol) server IP
address or domain name and port number where the mail is
stored on your network.
Default: Unconfigured, 25
set user add|del <NAME>
Example: set user add eng
Add or remove a user on the PrintNet defined by <name>.
IMPORTANT
Do not delete the root user, or you will be unable to configure
any further settings on the print server. You will have to go
back to factory defaults to correct this problem.
set user passwd <NAME> [<PASSWORD>]
Example: set user passwd eng mplex1
Assign a password to a defined user on the PrintNet.
set user type <NAME> root|guest
Example: set user type eng root
Assign root or guest privileges to a particular user defined by
username. Guest permissions allow viewing of settings only.
Root permissions allow complete control of the PrintNet.
set user from default
Set all user settings back to factory defaults.
set user from stored
Set all current user settings to the values stored in flash
memory.
set user passwd snmp <COM_NAME>
Set the new SNMP R/W community name as the <com_name>
value.
Set Commands
195