Printronix PrintNet P8000 Line User Manual page 49

Device Type
By default, the device type is always set to IBM.
WSCST Name
(TN5250 mode) As declared on the AS/400 host for the created
printer device.
Default: *NONE
WSCST Library
(TN5250 mode) As declared on the AS/400 host for the created
printer device.
Auto Connect
Specifies whether the PrintNet will automatically connect to the
host.
Default: Disabled
Start/Stop Auto Connect
Specifies whether the PrintNet should retry automatic connection to
the host.
Default: 'Start' if Auto Connect is currently stopped, 'Stop' if Auto
Connect is currently started.
49