Printronix PrintNet P8000 Line User Manual page 226

EEPROM
factory defaults
Factory Settings
Firmware Panic
Flash
FTP
gateway
gateway address
Hardware Exception
HTML
ifnum
interface script
226
Electrically Erasable/Programmable Read-
Only Memory.
Settings shipped with the PrintNet.
S2 jumper position stating all factory
default settings are to be used while the
PrintNet is up and running.
Unrecoverable errors detected by the
PrintNet firmware force the Print Server
into Firmware Panic mode. Manually reset
the PrintNet to resume operation.
Stores firmware code and configurable
settings. Allows for upgrades without
replacing hardware inside the PrintNet.
File Transfer Protocol. Used for
transferring files from one TCP/IP host to
another and used in the upgrade process.
Hardware device that translates data
between two incompatible networks.
The IP address of a gateway.
Bus errors, address errors, and illegal
instructions force the PrintNet into this
PrintNet non-operational mode.
HyperText Markup Language. Format
used for documents viewable on the World
Wide Web.
Interface Number. Represents the network
interface. With a PrintNet, this will always
be "1" for Ethernet.
Unix host filter file that processes the print
job before it is sent over the network to the
PrintNet.