Printer Sharing Parameters - Printronix PrintNet P8000 Line User Manual

Chapter 8
Sharing the AS/400 Printer on the Network

Printer Sharing Parameters

To set up AS/400 for printer sharing, set the following parameters.
AS/400
Where Set
Version
V3R2 CRTPSFCFG
CHGPSFCFG
V3R2 CRTPSFCFG
CHGPSFCFG
140
Table 3. Printer Sharing
Recommended
Parameter
Value
RLSTMR *NORDYF
ACTRLSTMR *SEC15
Description
Specifies the point at
which the release timer
(RLSTMR) is activated.
Set to *NORDYF. This
means that the release
timer is activated when
there are no spooled
files in the printer's
output queue with a
status of RDY and the
last page of the last
spooled file processed
has printed. *NORDYF
is used so that all files
with a status of RDY are
printed before releasing
the session (which does
not terminate the
writer).
Specifies the amount of
time to wait before a
session or dialog is
released without
terminating the writer.
The ACTRLSTMR
parameter specifies
when this timer is to be
activated. Set the
parameter to a value at
least equal to the
TIMEOUT value on the
printer. The
recommended value is
*SEC15.