Printronix PrintNet P8000 Line User Manual page 57

System Information
Contact
Optional field to help identify the individual or group responsible for
the printer.
Printer Serial Number
Allows the user to enter the printer's serial number. If the printer's
controller board is replaced, this field will be blank. The service
representative can enter the printer's serial number in this field.
SMTP Server
Specifies the IP address or domain name of the SMTP server to be
used for processing email messages generated by the PrintNet.
Default: Unconfigured (empty).
TCP Services
There are two protocols that users can disable. Usually major
corporations prefer to disable ftp and telnet once configuration of
the printer is complete. ftp and telnet protocols are set to enable by
default. If these protocols are disabled, you can use the Webpage
to enable them.
If HTTP protocol is disabled along with ftp and telnet, the only way
to enable these protocols is by sending a print job with
PTX_SETUP commands. (Refer to printer's User's Manual for
PTX_SETUP syntax.)
57