Printronix PrintNet P8000 Line User Manual page 206

Chapter 13
PrintNet Security
3. List the current access list.
Syntax:
list tcpip
If the list is empty, all hosts have access to the PrintNet
services. If there are entries in the list, only those hosts
specified have access to printing and remote command
execution.
To add and delete access list entries, the commands are:
Syntax:
store tcpip tcp access add|del hostIPaddress|
networkaddress
reset
where hostIPaddress is the IP address of a TCP/IP host on
your network and networkaddress is the address of a subnet on
your network.
Example:
store tcpip tcp access add 192.75.11.25
store tcpip tcp access add 192.75.12.0
store tcpip tcp access del 192.75.11.25
reset
NOTE: Although the maximum number of entries in the access list
206
is 10, each entry can refer to a network rather than a
specific host. This allows all hosts on that specified network
and any individual hosts specified in the list to have access.