Configuring Psf/400 For Ipds On V3R2 - Printronix PrintNet P8000 Line User Manual

Chapter 8
Configuring on AS/400 as an IPDS Printer

Configuring PSF/400 for IPDS on V3R2

To configure IPDS on AS/400 V3R2, use the following commands:
•
CRTDEVPRT
•
CRTPSFCFG
Configuring PSF with CRTDEVPRT on V3R2
This section describes how to create a printer device description.
1. At the AS/400 command line, enter a command in the form:
CRTDEVPRT
Where printer_type (e.g., T5000, P5000, L5520) is the
model of your printer.
2. A completed screen looks like the example shown in Figure 31,
which starts on the next page.
120
DEVD(printer_type) DEVCLS(*RMT) TYPE(*IPDS)
MODEL(0) AFP(*YES) AFPATTACH(*APPC)
FONT(11) RMTLOCNAME(TCPIP) FORMFEED(*CONT)
TEXT('printer_type NETWORK PRINTER')