Main Npsh Command Prefixes; Getting Command Help - Printronix PrintNet P8000 Line User Manual

Chapter 12
Command Shell Overview

Main npsh Command Prefixes

All configurable commands either start with store or set, and
view commands start with list.
NOTE: If the store prefix is used, the PrintNet must be repowered
NOTE: If the set prefix is used, a save command must be

Getting Command Help

The PrintNet command shell provides several online help tools,
including:
"?" Command
Typing "
list of all available commands.
Command Prefixes
Typing in the first portion of a command will produce an error
message showing the correct syntax. For example, typing in store
tcpip will produce a list of all commands that start with this prefix.
176
to make the changes take effect. Since store affects flash
memory settings only, the print server must reset and read
the new settings now in flash memory.
executed as well so that the new settings are retained after
power cycles. Since set only affects the settings in
memory, they will be lost after a power cycle unless they
are saved to flash memory.
? " when logged in to the command shell will produce a full