Windows Nt 4.0 Or 2000 Host Setup Problems - Printronix PrintNet P8000 Line User Manual

Line matrix printers printnet ethernet
Table of Contents

Advertisement

Appendix A
Windows Troubleshooting Tips

Windows NT 4.0 or 2000 Host Setup Problems

The installation procedure covered earlier in this chapter assumes
that the PrintNet is configured with the correct IP address, subnet
mask and gateway (if required), and that the administrator can ping
and telnet to the PrintNet from the server console. If this is not
the case, use the printer front panel to configure the PrintNet before
proceeding.
Installing Microsoft TCP/IP Printing
The PrintNet installation for Windows NT 4.0/2000 also requires the
"Microsoft TCP/IP Printing" service on the server. To install this
service, click the Network icon in the Control Panel and click the
Services tab. Click Add Service and select Microsoft TCP/IP
printing.
Do you have administrative privileges?
This installation requires administrator privileges.
"LPR port" is not listed.
Cancel the installation and install the Microsoft TCP/IP printing
service on the server.
LPR configuration warning.
214

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents