TCP/IP Network
Interface
The three editable fields contain the PrintNet's IP address, subnet
mask, and Gateway. The check boxes enable the BOOTP, DHCP,
and Persistent DHCP protocols, which are alternate methods of
assigning IP addresses. On most networks, you want to enter a
permanent IP address and subnet mask and disable BOOTP and
DHCP. However, if your network requires one of these, you should
clear the IP address (and possibly the subnet mask) fields and
ensure that the appropriate check box is selected.
Figure 8. TCP/IP Static Route
37
Need help?
Do you have a question about the PrintNet P8000 Line and is the answer not in the manual?
Questions and answers