Table of Contents
Advertisement
Chapter 7
Configuring the AS/400 for Printing
Connection Type (CNNTYPE)
Specify this value as *IP.
Destination Type (DESTTYP)
Specify *OTHER. *OTHER is a performance enhancement, in
which data is not required to be transformed again if the
connection is interrupted and allows printing of multiple copies.
Transform (TRANSFORM)
Specify this value as *YES.
Manufacturer Type (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the
WSCO. Select *IBM6400EP for Epson emulation or
*IBM6400PR or *IBM42023 for Proprinter Emulation.
Troubleshooting
This installation procedure assumes that the PrintNet is configured
with the correct IP address, subnet mask, and gateway (if required).
In addition you can also ping and telnet to the PrintNet.
Print an E-net Test Page to verify the Ethernet settings.
See "Printing an Ethernet Test Page" on page 26.
The default PrintNet queue name is d1prn, however, the name can
be changed. Substitute the changed name for the RMTPRTQ
parameter. To verify the queue name, print an E-Net Test Page or
telnet to the PrintNet and perform a "list dest" command.
Internet address (INTNETADR)
Specify the IP address of the printer.
112
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
