List Commands - Printronix PrintNet P8000 Line User Manual

List Commands

These commands list the current or working settings for a particular
section within the command shell. To view stored settings in flash
memory, insert stored after list. For example, list prn
shows the current printer settings but list stored prn shows
the settings in flash memory. Normally these should match. To view
default settings in flash memory, insert default after list.
list all
Lists all current settings.
list arp
List the current ARP table that the PrintNet adheres to in a
TCP/IP network.
list dest [destination]
List the current destination settings (e.g., names and mapped
I/O ports, models, logpaths, and services.).
list diff
List the differences between the current settings and the stored
settings in flash memory. Normally, you want these values to
match, so issue a save
command.
list ifc
Lists the current PrintNet interface settings (e.g., link integrity).
list logins
List any active user logins on the PrintNet.
list logpath [logpath]
List the current logpath settings (e.g., names and mapped
destinations).
List Commands
command followed by a reset
197